Ntp-B70 Create, Download, And Assign Alarm Severity Profiles; Figure 6-7 Viewing An Alarm-Affected Circuit - Cisco ONS 15327 Procedure Manual

NTP-B70 Create, Download, and Assign Alarm Severity Profiles

Figure 6-7
If you want to search for particular circuits, see the
Step 4
Stop. You have completed this procedure.
NTP-B70 Create, Download, and Assign Alarm Severity Profiles
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Cisco ONS 15327 Procedure Guide, R4.0
6-16
Viewing an Alarm-Affected Circuit
Use this procedure to create a customized copy of the default alarm profile
applied to a node, to download a saved custom profile from a network
location to another node, to individually assign the custom severities to a
port, card, or node, and to delete alarm profiles.
None
As needed
Onsite or remote
Provisioning or higher
"DLP-B131 Search for Circuits" task on page
Chapter 6 Manage Alarms
8-5.
November 2004