Dlp-B118 Delete Alarm Severity Profiles; Figure 6-13 Select Node/Profile Combination For Delete Dialog Box - Cisco ONS 15327 Procedure Manual

Chapter 6 Manage Alarms
To apply the profile to an entire node:
Step 3
a.
b.
c.
Tip
Return to your originating procedure (NTP).
Step 4

DLP-B118 Delete Alarm Severity Profiles

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, choose Go to Network View from the View menu.
Step 1
Click the Provisioning > Alarm Profiles tabs.
Step 2
Step 3 Click the column heading for the profile column you want to delete
The selected alarm profile name is displayed in the Description field.
Click Delete.
Step 4
The Select Node/Profile Combination for Delete dialog box appears

Figure 6-13 Select Node/Profile Combination For Delete Dialog Box

Click the node name(s) in the Node Names list to highlight the profile location.
Step 5
Tip
November 2004
Click the Node Profile menu arrow at the bottom of the window
Choose the new alarm profile in the Profile drop-down menu.
Click Apply.
If you choose the wrong profile, click Reset to return to the previous profile.
Use this task to delete a custom or default alarm severity profile.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Provisioning or higher
If you hold the Shift key down, you can select consecutive node names. If you hold the Ctrl key
down, you can select any combination of nodes.
NTP-B70 Create, Download, and Assign Alarm Severity Profiles
(Figure 6-12 on page
(Figure 6-8 on page
(Figure
Cisco ONS 15327 Procedure Guide, R4.0
6-24).
6-18).
6-13).
6-25