Ntp-B195 Monitor Electrical Or Optical Performance - Cisco ONS 15327 Procedure Manual
Hide thumbs
Also See for ONS 15327:
- User documentation (559 pages) ,
- Manual (42 pages) ,
- Reference manual (166 pages)
Table of Contents
Advertisement
NTP-B195 Monitor Electrical or Optical Performance
NTP-B195 Monitor Electrical or Optical Performance
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
already logged in, continue to
Complete the
Step 2
As needed, use the following tasks to change the display of electrical PM counts:
Step 3
•
•
•
•
•
•
•
•
Complete the
Step 4
Step 5
As needed, use the following tasks to change the display of optical PM counts:
•
•
•
•
•
•
•
•
•
Stop. You have completed this procedure.
Cisco ONS 15327 Procedure Guide, R4.0
7-6
The Performance Monitoring window allows you to view node near-end
or far-end performance on a selected card and port at specified time
intervals to detect possible performance problems.
None
Before you monitor performance, be sure you have created the
appropriate circuits and provisioned the card according to your
specifications. For more information, see
and VT Tunnels"
As needed
Onsite
Retrieve or higher
"DLP-B60 Log into CTC" task on page 2-23
"DLP-B123 View Electrical PM Parameters" task on page 7-7
DLP-B261 Refresh PM Counts for a Different Port, page 7-8
DLP-B124 Refresh Electrical or Optical PM Counts at Fifteen-Minute Intervals, page 7-8
DLP-B318 Refresh Electrical or Optical PM Counts at One-Day Intervals, page 7-9
DLP-B126 Monitor Near-End PM Counts, page 7-10
DLP-B127 Monitor Far-End PM Counts, page 7-10
DLP-B129 Reset Current PM Counts, page 7-11
DLP-B130 Clear Selected PM Counts, page 7-11
DLP-B260 Set Auto-Refresh Interval for Displayed PM Counts, page 7-12
"DLP-B317 View Optical OC-N PM Parameters" task on page 7-13
DLP-B261 Refresh PM Counts for a Different Port, page 7-8
DLP-B124 Refresh Electrical or Optical PM Counts at Fifteen-Minute Intervals, page 7-8
DLP-B318 Refresh Electrical or Optical PM Counts at One-Day Intervals, page 7-9
DLP-B126 Monitor Near-End PM Counts, page 7-10
DLP-B127 Monitor Far-End PM Counts, page 7-10
DLP-B319 Monitor PM Counts for Selected Signal Types, page 7-14
DLP-B129 Reset Current PM Counts, page 7-11
DLP-B130 Clear Selected PM Counts, page 7-11
DLP-B260 Set Auto-Refresh Interval for Displayed PM Counts, page 7-12
and
Chapter 10, "Change Port Settings."
Step
2.
Chapter 7
Monitor Performance
Chapter 5, "Create Circuits
at the node you want to monitor. If you are
as needed.
as needed.
March 2003
Advertisement
Table of Contents
