Cisco ONS 15327 Procedure Manual page 305
Hide thumbs
Also See for ONS 15327:
- User documentation (559 pages) ,
- Manual (42 pages) ,
- Reference manual (166 pages)
Table of Contents
Advertisement
Manage Circuits
The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms
Note
do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration.
Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's
path protection feature, which may be used in any topological network configuration. Cisco does not
recommend using its path protection feature in any particular topological network configuration.
This chapter explains how to manage Cisco ONS 15327 electrical, optical, and Ethernet circuits.
Before You Begin
To create circuits, see
To clear any alarm or trouble conditions, refer to the Cisco ONS 15327 Troubleshooting Guide.
This section lists the chapter procedures (NTPs). Turn to a procedure for applicable tasks (DLPs).
1.
2.
3.
4.
5.
6.
7.
8.
March 2003
Chapter 5, "Create Circuits and VT Tunnels."
NTP-B199 Locate and View Circuits, page
NTP-B151 Modify Circuit Characteristics, page
NTP-B151 Modify Circuit Characteristics, page
change the active and standby colors of spans, or change signal fail thresholds, signal degrade
thresholds, reversion time, and PDI-P settings for path protection circuits.
NTP-B416 Convert a CTC Circuit to TL1 Cross-Connects, page
you want to convert a CTC circuit into TL1 cross-connects.
NTP-B417 Upgrade TL1 Cross-Connects to CTC Circuits, page
you want to convert TL1 cross-connects or TL1-like cross-connects created in CTC into a CTC
circuit.
NTP-B152 Delete Circuits, page
NTP-B78 Create a Monitor Circuit, page
bidirectional circuits.
NTP-B79 Create a J1 Path Trace, page
changes to circuit traffic.
C H A P T E R
8-3—Complete as needed.
8-8—Complete as needed.
8-8—Complete as needed to edit a circuit name,
8-15—Complete as needed.
8-16—Complete as needed to monitor traffic on primary
8-17—Complete as needed to monitor interruptions or
Cisco ONS 15327 Procedure Guide, R4.0
8
8-13—Complete this procedure if
8-14—Complete this procedure if
8-1
Advertisement
Table of Contents
