NTP-B171 Set Up SNMP
Trap Version—Choose either SNMPv1 or SNMPv2. Refer to your NMS documentation to
•
determine the version to use.
Max Traps per Second—Type the maximum traps per second. The default is 0.
•
Note
Figure 3-3
Click OK.
Step 6
Click the node IP address under Trap Destinations
Step 7
appears under Selected Destination.
Figure 3-4
Cisco ONS 15327 Procedure Guide, R4.0
3-22
The Max Traps per Second is the maximum number of traps per second that will be sent to the
SNMP manager. If the field is set to 0, there is no maximum and all traps are sent.
Setting SNMP
SNMP Trap Destinations
(Figure
3-4). Verify the SNMP information that
Chapter 3
Turn Up Node
March 2003