Ntp-B 169 Set Up Ctc Network Access; Dlp-B249 Provision Ip Settings - Cisco ONS 15327 Procedure Manual

Hide thumbs Also See for ONS 15327:
Table of Contents

Advertisement

Chapter 3
Turn Up Node
NTP-B169 Set Up CTC Network Access
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Step
Step 2
Complete the
address, subnet mask, default router, DHCP server, IIOP listener port, and proxy server settings.
If static routes are needed, complete the
Step 3
Cisco ONS 15327 Reference Manual for further information about static routes.
If the ONS 15327 is connected to a LAN or WAN that uses OSPF, complete the
Step 4
Change Open Shortest Path First Protocol" task on page
If the ONS 15327 is connected to a LAN or WAN that uses RIP, complete the
Step 5
Change Routing Information Protocol" task on page
Stop. You have completed this procedure.

DLP-B249 Provision IP Settings

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
All network changes should be approved by your network (or LAN) administrator.
Caution
If you are in network view, switch to node view by double-clicking the node you want to turn up on the
Step 1
network map.
Click the Provisioning > Network tabs.
Step 2
March 2003
This procedure provisions network access for a node, including its subnet
mask, default router, Dynamic Host Configuration Protocol (DHCP)
server, IIOP listener port, proxy server settings, static routes, open shorted
path first (OSPF) protocol, and routing information protocol (RIP).
None
NTP-B24 Verify Card Installation, page 3-2
Required
Onsite or remote
Provisioning or higher
"DLP-B60 Log into CTC" task on page
2.
"DLP-B249 Provision IP Settings" task on page 3-7
This task provisions IP settings, which includes the IP address, default
router, DHCP access, firewall access, and proxy server settings for an ONS
15327 node.
None
DLP-B60 Log into CTC, page 2-23
Required
Onsite or remote
Provisioning or higher
2-23. If you are already logged in, continue with
"DLP-B65 Create a Static Route" task on page
3-10.
3-12.
Cisco ONS 15327 Procedure Guide, R4.0
NTP-B169 Set Up CTC Network Access
to provision the ONS 15327 IP
3-9. Refer to the
"DLP-B250 Set Up or
"DLP-B251 Set Up or
3-7

Advertisement

Table of Contents
loading

Table of Contents