Dlp-B117 Apply Alarm Profiles To Cards And Nodes; Figure 6-12 Node View Alarm Profile - Cisco ONS 15327 Procedure Manual

NTP-B70 Create, Download, and Assign Alarm Severity Profiles

DLP-B117 Apply Alarm Profiles to Cards and Nodes

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, click the Provisioning > Alarm Behavior tabs
Step 1

Figure 6-12 Node View Alarm Profile

To apply profiles to a card:
Step 2
a.
b.
c.
Continue with
Cisco ONS 15327 Procedure Guide, R4.0
6-24
Use this task to apply a custom or default alarm profile to cards or nodes.
None
DLP-B115 Create Alarm Severity Profiles, page 6-17
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Provisioning or higher
Click the Profile row for the card.
Choose the new profile from the Profile drop-down menu.
Click the Apply button.
Step 4.
Chapter 6
(Figure 6-12).
Manage Alarms
November 2004