Dlp-B265 Change The Login Legal Disclaimer - Cisco ONS 15327 Procedure Manual

Chapter 9 Change Node Settings
•
Note
•
•
•
•
•
Step 3 Click Apply. Confirm that the changes appear; if not, repeat the task.
Return to your originating procedure (NTP).
Step 4

DLP-B265 Change the Login Legal Disclaimer

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 In node view, click the Provisioning > Security > Legal Disclaimer > HTML tabs.
Step 2 The existing statement is a default, non-customer-specific disclaimer. If you want to edit this statement
with specifics for your company, you can change the text. You can also use the following HTML
commands to format the text:
•
•
•
•
•
•
•
•
•
March 2003
Location: Description
To see changes to longitude or latitude on the network map, you must go to network view and
right-click the specified node, then click Reset Node Position.
Time: Use SNTP Server
Time: Date (M/D/Y)
Time: Time (H:M:S)
Time: Time Zone
Time: Use Daylight Saving Time
See the "NTP-B25 Set Up Name, Date, Time, and Contact Information" procedure on page 3-5
detailed field descriptions.
Use this task to modify the legal disclaimer statement shown in the CTC
login dialog box so that it will display customer-specific information when
users log into the network.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Superuser
<b> Begins boldface font
</b> Ends boldface font
<center> Aligns type in the center of the window
</center> Ends the center alignment
<font=n, where n = point size> Changes the font to the new size
</font> Ends the font size command
<p> Creates a line break
_{Begins subscript} Ends subscript
NTP-B81 Change Node Management Information
Cisco ONS 15327 Procedure Guide, R4.0
for
9-3