Dlp-B306 View Loopback Status; Dlp-B307 View Ethernet Bandwidth Usage - Cisco ONS 15327 Procedure Manual

Chapter 14 Maintain the Node

DLP-B306 View Loopback Status

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click a G1000-2 Ethernet card. The card view displays.
Step 1
Step 2 Click the Maintenance tab.
Click the Loopback tab.
Step 3
The # and State columns identify the port number and current operating state (IS, OOS, OOS_MT) of
each port on the card. The Loopback Type column identifies the type of loopback (None or Terminal)
applied to each port on the card.
Step 4 Return to your originating procedure (NTP).

DLP-B307 View Ethernet Bandwidth Usage

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 In node view, double-click a G1000-2 Ethernet card. The card view displays.
Step 2 Click the Maintenance tab.
Click the Bandwidth tab.
Step 3
The current STS bandwidth usage information appears.
Return to your originating procedure (NTP).
Step 4
March 2003
NTP-B215 View G1000-2 Ethernet Maintenance Information
This task changes the screen view to display the loopback status on a
selected G1000-2 Ethernet card port.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Retrieve or higher
This task changes the screen view to display Ethernet bandwidth usage
on a selected G1000-2 Ethernet card.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Retrieve or higher
Cisco ONS 15327 Procedure Guide, R4.0
14-25