Figure 1-4 Removing The Mic Power Connector - Cisco ONS 15327 Procedure Manual

NTP-B6 Install the Power and Ground
Figure 1-4
Step 6 Remove the cable fastening screws, which are the screws on the top of the connector that become visible
when the connector is removed.
Step 7 Insert the (black) return (RTN) wire into the right connector slot.
inserted into the MIC power connector.
Cisco ONS 15327 Procedure Guide, R4.0
1-16
Removing the MIC Power Connector
-4 8 V
R T N
P W R A
Chapter 1 Install Hardware
Figure 1-5 shows a power cable being
March 2003