Figure 2-2 Logging Into Ctc - Cisco ONS 15327 Procedure Manual

NTP-B23 Log into the ONS 15327 GUI
Figure 2-2
In the Login dialog box, type a user name and password (both are case sensitive). For initial setup, type
Step 3
the user name CISCO15.
Note
Each time you log into an ONS 15327, you can make selections for the following login options:
Step 4
Node Name—Displays the IP address entered in the web browser and a drop-down menu of
•
previously entered ONS 15327 IP addresses. You can select any ONS 15327 on the list for the login,
or you can enter the IP address (or node name) of any new node where you want to log in.
Additional Nodes—Displays a list of login node groups that are created. To create a login node
•
group or add additional groups, see the
Note
Disable Network Discovery—Check this box to view only the ONS 15327 (and login node group
•
members, if any) entered in the Node Name field. Nodes linked to the Node Name ONS 15327
through the DCC are not displayed. Using this option can decrease the CTC startup time in networks
with many DCC-connected nodes.
Cisco ONS 15327 Procedure Guide, R4.0
2-24
Logging into CTC
The CISCO15 user is provided with every ONS 15327. CISCO15 has superuser privileges, so
you can create other users. You must create another superuser before you can delete the
CISCO15 user. CISCO15 is delivered without a password. To create a password for CISCO15,
click the Provisioning > Security tabs after you log in and change the password. To set up
ONS 15327 users and assign security, go to the
procedure on page 3-3. Additional information is provided in the Cisco ONS 15327 Reference
Manual.
Topology hosts that were created in previous ONS 15327 releases by modifying the ctc.ini
(Windows) or .ctcrc (UNIX) files are displayed as a Topology Host group under Additional
Nodes.
Chapter 2
"NTP-B30 Create Users and Assign Security"
"DLP-B61 Create Login Node Groups" task on page
Connect the PC and Log into the GUI
2-25.
March 2003