Ntp-B164 Edit Network Element Defaults - Cisco ONS 15327 Procedure Manual

NTP-B164 Edit Network Element Defaults

NTP-B164 Edit Network Element Defaults
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Step 1 Complete the
Step 2.
Step 2 Click the Provisioning > Defaults Editor tabs.
In the Defaults Selector area, choose a card (if you are editing card-level defaults) or NODE (if you are
Step 3
editing node-level defaults). Click the node name at the top of the Defaults Selector column to list all
available NE defaults under Property Name.
Step 4 Locate a default you want to change under Property Name.
Step 5 Click the Default Value column for the default property you are changing and choose a value from the
drop-down menu (available for some node-level settings only), or type the new value. You can modify
multiple default values before applying the changes.
Note
Step 6 Click Apply.
Note
Click Yes on the conformation dialog box. The dialog box appears if you are modifying node-level
Step 7
defaults; it notifies you that applying defaults for node level attributes overrides current provisioning.
Note
Stop. You have completed this procedure.
Cisco ONS 15327 Procedure Guide, R4.0
C-2
This procedure edits the NE defaults using the NE Defaults Editor. The
new defaults can either be applied only to the login node or exported to a
file and imported for use on other nodes.
None
As needed
Onsite or remote
Superuser only
"DLP-B60 Log into CTC" task on page
If you click Reset before you click Apply, all values will return to their original settings.
If the property is unavailable, click the Property Name column to activate the Apply button.
Changes to node settings take effect when you click Apply. Changes to the IIOP Listener Port
setting reboots the XTC. Changes made to card settings using the Defaults Editor do not change
the settings for cards that are currently installed or slots that are pre-provisioned for cards. Card
settings must be manually changed using procedures in
Appendix C
2-23. If you are already logged in, continue with
Chapter 10, "Change Port Settings."
Network Element Defaults
March 2003