Cisco ONS 15327 Procedure Manual page 283

Chapter 6 Manage Alarms
Complete the following fields for each external control wired to the MIC:
Step 7
Enabled—Check this the check box to activate the Control Type, Trigger Type, and Description
•
columns for the alarm input number.
Control Type—Choose an option: air conditioner, engine, fan, generator, heat, light, sprinkler, or
•
miscellaneous.
Trigger Type—Choose a trigger type: a local minor, major, or critical alarm; a remote minor, major,
•
or critical alarm; or a virtual wire activation.
Description—Enter a description.
•
To provision a second external control, complete
Step 8
Click Apply.
Step 9
Stop. You have completed this procedure.
November 2004
NTP-B32 Provision External Alarms and Controls on the XTC
Step 7 for the additional device.
Cisco ONS 15327 Procedure Guide, R4.0
6-35