Chapter 6
Manage Alarms
Repeat the task for each window that you want to export.
Step 10
Return to your originating procedure (NTP).
Step 11
NTP-B196 View Alarms, History, Events, and Conditions
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Log into the node that contains the alarms you want to view. See the
Step 1
page 2-23
In the card, node (default), or network-level CTC view, click the Alarms tab to display the alarms for
Step 2
that card, node, or network
November 2004
Use this procedure to view current or historical alarms and conditions for
a card, a node, or network. This information is useful for monitoring and
troubleshooting hardware and software events.
None
As needed
Onsite or remote
Provisioning
for instructions. If you are already logged in, proceed to
(Figure 6-3 on page
NTP-B196 View Alarms, History, Events, and Conditions
"DLP-B60 Log into CTC" task on
Step
2.
6-6).
Cisco ONS 15327 Procedure Guide, R4.0
6-5