Ntp-B168 Enable, Modify, Or Disable Alarm Severity Filtering - Cisco ONS 15327 Procedure Manual

NTP-B168 Enable, Modify, or Disable Alarm Severity Filtering

Click the profile name(s) you want to delete in the Profile Names list.
Step 6
Click OK.
Step 7
The Delete Alarm Profile confirmation dialog box appears.
Click Yes for each Delete Alarm Profile confirmation dialog box.
Step 8
Note
Step 9 To remove the alarm profile from the Provisioning > Alarm Profiles window, right-click the column of
the profile you deleted and choose Remove from the shortcut menu.
Note
Note
Return to your originating procedure (NTP).
Step 10
NTP-B168 Enable, Modify, or Disable Alarm Severity Filtering
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Step
As necessary, complete the
Step 2
filtering at the card, node, and network views for all nodes in the network. Alarm filtering can be enabled
for alarms, conditions, or events.
As necessary, complete the
Step 3
page 6-28
conditions.
Cisco ONS 15327 Procedure Guide, R4.0
6-26
If you delete a profile from a node, it still appears in the network view
Provisioning > Alarm Profiles window unless you remove it by choosing Remove.
If a a node and profile combination is selected but does not exist, a warning appears: "One or
more of the profile(s) selected do not exist on one or more of the node(s) selected." The profiles
that do exist will be deleted.
The special profiles named Default and Inherited cannot be deleted and do not appear in the
Select Node/Profile Combination for Delete Window.
Use this procedure to start, change, or stop alarm filtering for one or more
severities in the Alarms, Conditions, and History windows in all network
nodes.
None
As needed
Onsite or remote
Retrieve or higher
"DLP-B60 Log into CTC" task on page
2.
"DLP-B225 Enable Alarm Filtering" task on page 6-27
"DLP-B226 Modify Alarm and Condition Filtering Parameters" task on
to modify the alarm filtering for network nodes to show or hide particular alarms or
Chapter 6
2-23. If you are already logged in, continue with
Manage Alarms
to enable alarm
November 2004