Figure 2-1 Cisco Transport Controller Installation Wizard - Cisco ONS 15327 Procedure Manual

Chapter 2 Connect the PC and Log into the GUI
Figure 2-1
Click Next.
Step 3
Choose Typical to install all the components shown in
Step 4
to install some of the components.
Click Next.
Step 5
If you selected Custom in
Step 6
selected Typical, skip this step and proceed to
The directory where the installation wizard will install CTC online help is displayed. The default is
Step 7
C:\Program Files\Cisco\CTC\Documentation.
If you do not want to change the directory, skip this step and proceed to
a.
If you want to change the CTC online help directory, type the new directory path in the Directory
b.
Name field, or click Browse to navigate to the directory.
Click Next.
Step 8
Review the components that will be installed. If you want to change them, click Back. If you have an
Step 9
active CTC session (for example, you are monitoring alarms or conditions), close CTC before going to
Step 10.
Click Next.
Step 10
An Installation Issues dialog box is displayed.
Review the issues, then click OK. The InstallShield program begins the Netscape Communicator 4.73
Step 11
Setup program.
Complete the Netscape installation:
Step 12
In the Netscape Communicator 4.73 Setup dialog box, click Next.
a.
b. In the Software License Agreement dialog box, click Yes.
c. In the Setup Type dialog box, click Typical, then click Next.
March 2003
Cisco Transport Controller Installation Wizard
Step 4, select the CTC components you want to install and click Next. If you
NTP-B21 Set Up Computer for CTC
Figure 2-1, or choose Custom if you only want
Step 7.
Cisco ONS 15327 Procedure Guide, R4.0
Step 8.
2-3