Chapter 3
Turn Up Node
On the General subtab under XTC CORBA (IIOP) Listener Port, choose a listener port option:
Step 2
Default - XTC Fixed—Select this option if the ONS 15327s are on the same side of the firewall as
•
the CTC computer or if no firewall is used (default). This option sets the ONS 15327 listener port
to Port 57790. It can be used for access through a firewall if Port 57790 is open.
Standard Constant—Select this option to use Port 683, the CORBA default port number, as the ONS
•
15327 listener port.
Other Constant—If Port 683 is not used, type the IIOP port specified by your firewall administrator.
•
The port cannot use any of the ports shown in
Table 3-1
Port
0
21
23
80
111
513
=<1023
1080
2001-2017
2018
2361
3082
3083
5001
5002
7200, 7209,
7210
9100
9101
9401
9999
57790
Click Apply.
Step 3
When the Change Network Configuration message appears, click Yes.
Step 4
Both ONS 15327 XTCs will reboot, one at a time. The reboot will take approximately 10 to 15 minutes.
Return to your originating procedure (NTP).
Step 5
March 2003
Ports Used by the XTC Cards
Function
Never used
FTP control
TELNET
HTTP
rpc (not used; but port is in use)
rlogin (not used; but port is in use)
Default CTC listener ports
Proxy server
I/O card telnet
DCC processor on active XTC
TL1
TL1
TL1
BLSR server port
BLSR client port
SNMP input port
EQM port
EQM port 2
XTC boot port
Flash manager
Default XTC listener port
NTP-B27 Set Up the ONS 15327 for Firewall Access
Table
3-1.
Cisco ONS 15327 Procedure Guide, R4.0
3-15