Cisco ONS 15327 Procedure Manual page 94
Hide thumbs
Also See for ONS 15327:
- User documentation (559 pages) ,
- Manual (42 pages) ,
- Reference manual (166 pages)
Table of Contents
Advertisement
NTP-B22 Set Up CTC Computer to Connect to the ONS 15327
In the Subnet Mask field, type the same subnet mask as the ONS 15327. The default is
i.
255.255.255.0 (24 bit).
Click OK.
j.
In the TCP/IP dialog box, click the Gateway tab.
k.
In the New Gateway field, type the address entered in Step f. Click Add.
l.
Verify that the IP address appears in the Installed Gateways field, then click OK.
m.
When the prompt to restart your PC appears, click Yes.
n.
Step 3
If you have Windows NT 4.0 installed on your PC, complete the following steps:
a.
From the Windows Start menu, choose Settings > Control Panel.
In the Control Panel dialog box, click the Network icon.
b.
In the Network dialog box, click the Protocols tab, choose TCP/IP Protocol, then click Properties.
c.
Click the IP Address tab.
d.
In the IP Address window, click Specify an IP address.
e.
In the IP Address field, enter any legitimate IP address other than the node IP address of the
f.
ONS 15327.
In the Subnet Mask field, type the same subnet mask as the ONS 15327. The default is
g.
255.255.255.0 (24 bit).
Click the Advanced button.
h.
Under the Gateways List, click Add. The TCP/IP Gateway Address dialog box is displayed.
i.
Type the IP address entered in Step
j.
k.
Click Add.
l.
Click OK.
Click Apply.
m.
Reboot your PC.
n.
If you have Windows 2000 installed on your PC, complete the following steps:
Step 4
From the Windows Start menu, choose Settings > Network and Dial-up Connections >
a.
Local Area Connection.
In the Local Area Connection Status dialog box, click Properties.
b.
In the General tab, choose Internet Protocol (TCP/IP), then click Properties.
c.
Click Use the following IP address.
d.
e.
In the IP Address field, enter any legitimate IP address other than the node IP address of the
ONS 15327.
In the Subnet Mask field, type the same subnet mask as the ONS 15327. The default is
f.
255.255.255.0 (24 bit).
Type the IP address entered in Step
g.
h.
Click OK.
i.
In the Local Area Connection Properties dialog box, click OK.
In the Local Area Connection Status dialog box, click Close.
j.
Cisco ONS 15327 Procedure Guide, R4.0
2-16
Chapter 2
f
in the Gateway Address field.
e
in the Gateway Address field.
Connect the PC and Log into the GUI
March 2003
Advertisement
Table of Contents
