Ntp-B201 Change Ctc Network Access - Cisco ONS 15327 Procedure Manual

NTP-B201 Change CTC Network Access

•
•
•
•
If you want to preview your changed statement and formatting, click the Preview subtab.
Step 3
Step 4 Click Apply.
Step 5 Return to your originating procedure (NTP).
NTP-B201 Change CTC Network Access
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Additional ONS 15327 networking information and procedures, including IP addressing examples, static
Note
route scenarios, Open Shortest Path First (OSPF) protocol, and routing information protocol options are
provided in the IP Networking section of the Cisco ONS 15327 Reference Manual.
Complete the
Step 1
Step 2.
Complete the
Step 2
Perform any of the following tasks as needed:
Step 3
•
•
•
•
•
Complete the
Step 4
Stop. You have completed this procedure.
Cisco ONS 15327 Procedure Guide, R4.0
9-4
^{Begins superscript} Ends superscript
<u> Starts underline
</u> Ends underline
This procedure changes essential network information, including IP
settings, static routes, and OSPF options.
None
As needed
Onsite or remote
Provisioning or higher
"DLP-B60 Log into CTC" task on page
"NTP-B108 Back Up the Database" procedure on page
DLP-B266 Change IP Settings, page 9-5
DLP-B142 Modify a Static Route, page 9-6
DLP-B143 Delete a Static Route, page 9-6
DLP-B144 Disable the Open Shortest Path First Protocol, page 9-7
DLP-B250 Set Up or Change Open Shortest Path First Protocol, page
"NTP-B108 Back Up the Database" procedure on page
Chapter 9
2-23. If you are already logged in, continue with
14-6.
3-10.
14-6.
Change Node Settings
March 2003