Ethernet Setting - Mitsubishi Electric GOT1000 Series Connection Manual

5.3.3

Ethernet setting

Item Description
The host is displayed.(The host is
Host
indicated with an asterisk (*).)
Set the network No. of the
N/W No. connected Ethernet module.
(Default: blank)
Set the station No. of the
*2
connected Ethernet module.
PLC No.
(Default: blank)
*1
MODBUS/TCP (fixed)
Type
Set the IP address of the
IP Address connected Ethernet module.
(Default: blank)
Set the port No. of the connected
Port No. Ethernet module.
(Default: 502)
Communication
TCP (fixed)
format
*1 Select [MODBUS/TCP] for [Controller Type].
For the applicable Ethernet module, refer to the following.
5.2 System Configuration
*2 Each of [GOT PLC No.] set in the communication detail
setting and [PLC No.] set in the Ethernet setting must be set
to different station numbers.
5.3.2 Communication detail settings
POINT POINT POINT
Changing the host with GOT module (GT16, GT14
only)
The host can be changed by the GOT module Utility.
For details of settings, refer to the following.
(For GT16)
Range
―
1 to 239
1 to 247
MODBUS/TCP
(fixed)
PLC side IP
address
1 to 65535
TCP (fixed)
5. MODBUS(R)/TCP CONNECTION
GT16 User's Manual (Basic Utility)
GT14 User's Manual
5.3 GOT Side Settings
1
2
3
4
5
6
7
8
5 - 5