Dlp- D433 Run The Ctc Installation Wizard For Windows - Cisco ONS 15454 SDH Procedure Manual

DLP- D433 Run the CTC Installation Wizard for Windows

Figure 21-8
Return to your originating procedure (NTP).
Step 4
DLP-D433 Run the CTC Installation Wizard for Windows
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
If you will log into nodes running CTC software earlier than R4.6, uninstall JRE 1.4.2 or 5.0 and reinstall
Note
JRE 1.3.1_2. To run Software R7.0, uninstall JRE 1.3.1_2 and reinstall JRE 1.4.2 or 5.0. Software R7.0
supports JRE 1.4.2 or JRE 5.0; JRE 1.4.2 is provided on the software CD.
JRE 1.4.2 requires Netscape 7.x or Internet Explorer 6.x.
Note
Step 1 Verify that your computer has the following:
•
•
•
•
Cisco ONS 15454 SDH Procedure Guide, R7.0
21-18
Port Status on the LCD Panel
Slot Status
FAN FAIL CRIT MAJ
This task installs the CTC online user manuals, Acrobat Reader 6.0.1, Java
Runtime Environment (JRE) 1.4.2, and the CTC Java Archive (JAR) files.
JRE 1.4.2 is required to run Software Release 7.0. Preinstalling the CTC
JAR files saves time at initial login. If the JAR files are not installed, they
are downloaded from the TCC2/TCC2P card the first time you log in.
Cisco ONS 15454 SDH Release 7.0 software CD
This task is required if any one of the following is true:
•
•
•
Onsite or remote
None
Processor—Pentium III, 700 Mhz or faster
RAM—384 MB recommended, 512 MB optimum
Hard drive—20 GB hard drive recommended with at least 50 MB of space available
Operating system—Windows 98 (1st and 2nd editions), Windows NT 4.0 (with Service Pack 6a),
Windows 2000 (with Service Pack 3), or Windows XP Home
Port
Slot 13
Working / Active
MIN
JRE 1.4.2 or 5.0 is not installed.
CTC online user manuals are not installed and are needed.
CTC JAR files are not installed and are needed.
Chapter 21 DLPs D400 to D499
Port 1
78-17194-01