Show Snmp-Server Trap - Cisco 220 Series Smart Plus Reference Manual

SNMP Commands

show snmp-server trap

show snmp-server trap
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Example
switchxxxxxx# show snmp-server host
Server Community Name
UDP Port Retries
----------------------------------------------------------------------------
------------------------------------
10.172.1.1 public
-- --
Total Entries: 1
The following table describes the significant fields shown in the example:
Field
Server
Community Name
Notification Version
Notification Type
UDP Port
Retries
Timeout
To show whether SNMP traps are enabled or disabled on the switch, use the show
snmp-server trap Privileged EXEC mode command.
Syntax
show snmp-server trap
Parameters
N/A
Notification Version
Timeout
v3
--
Description
IP address or hostname of the SNMP notification
recipient.
SNMP community of the trap manager.
SNMP version for SNMP traps.
Send traps or informs to the recipients.
UDP port used for notifications on the recipient device.
Number of times that the switch resends an inform
request.
Number of seconds that the switch waits before
resending informs.
32
Notification Type
trap
434