SNMP Commands
snmp-server contact
snmp-server contact
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
•
Generates an internal security name.
•
Maps the internal security name for SNMPv1 and SNMPv2 security models
to the group name.
Example
The following example defines an SNMP community comm1 and associates it with
the group abcd:
switchxxxxxx(config)# snmp-server community comm1 group abcd
To set the system contact, use the snmp-server contact Global Configuration
mode command.
Syntax
snmp-server contact
Parameters
contact
•
—The system contact name. (Length: 0 to 256 characters)
Default Configuration
No contact name is defined.
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# snmp-server contact Robert
contact
32
440