Table of Contents
Advertisement
Clock Commands
clock summer-time
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
no clock summer-time
Parameters
zone
•
—The acronym of the time zone to be displayed when the summer
time is in effect. (Range: up to 4 characters)
•
recurring—Specifies that the summer time starts and ends on the
corresponding specified days every year.
-
usa—Specifies that the summer time rules are the United States rules.
-
eu—Specifies that the summer time rules are the European Union rules.
week
-
—Number of the week in the month (1 to 4), first, or last.
date
-
—Date of the week (first three characters by name, such as sun).
month
-
—Month (first three characters by name, such as feb).
•
date—Specifies that the summer time starts on the first date listed in the
command and ends on the second date in the command.
-
month
—Starting month (first three characters by name, such as feb).
day
-
—Starting date. (Range: 1 to 31)
year
-
—Starting date (no abbreviation). (Range: 2000 to 2037)
-
HH:MM
—Starting time (military format) in hours and minutes. (Range: hh:
0 to 23, mm: 0 to 59)
•
offset—(Optional) Number of minutes to add during the summer time. The
default is 60 minutes. (Range: 1 to 1440)
Default Configuration
The summer time is disabled.
Command Mode
Global Configuration mode
User Guidelines
In both the date and recurring forms of the command, the first part of the command
specifies when the summer time begins, and the second part specifies when it
ends. All times are relative to the local time zone. The start time is relative to the
standard time. The end time is relative to the summer time. If the starting month is
chronologically after the ending month, the system assumes that you are in the
southern hemisphere.
8
126
Advertisement
Table of Contents
