Table of Contents
Advertisement
Syslog Commands
show logging
show logging
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Command Mode
Global Configuration mode
User Guidelines
All SYSLOG messages are logged to the internal buffer. This command limits the
messages displayed to the user.
Example
The following example sets the severity level for logging messages to RAM and
flash as debugging:
switchxxxxxx(config)# logging buffered severity 7
To display the logging status and SYSLOG messages stored in the internal buffer,
use the show logging Privileged EXEC mode command.
Syntax
show logging [buffered | file]
Parameters
•
buffered—(Optional) Displays the log messages stored in the RAM.
•
file—(Optional) Displays the log messages stored in flash memory.
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
Example 1—The following example displays the logging status:
switchxxxxxx# show logging
35
458
Advertisement
Table of Contents
