Voice Vlan Dscp; Voice Vlan Mode - Cisco 220 Series Smart Plus Reference Manual

Voice VLAN Commands

voice vlan dscp

voice vlan dscp

voice vlan mode

Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To specify the DSCP value that will be advertised by LLDP in the network policy
TLV, use the voice vlan dscp Global Configuration mode command.
To revert to its default setting, use the no form of this command.
Syntax
dscp-value
voice vlan dscp
no voice vlan dscp
Parameters
dscp-value
• —The DSCP value to packets received on the voice VLAN.
(Range: 0 to 63)
Default Configuration
46
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# voice vlan dscp 63
To configure the voice VLAN mode on an interface, use the voice vlan mode
Interface Configuration mode command.
To revert to its default setting, use the no form of this command.
Syntax
voice vlan mode {auto | manual}
no voice vlan mode
40
495