IP DHCP Snooping Commands
clear ip dhcp snooping binding
clear ip dhcp snooping binding interface
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To clear the DHCP snooping binding entries for all addresses or for specific IP
address, use the clear ip dhcp snooping binding Privileged EXEC mode command.
Syntax
clear ip dhcp snooping binding {* |
Parameters
—
•
*
Clears all dynamic entries
IPv4-Addr—
•
The entry for an IPv4 address.
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# clear ip dhcp snooping binding 192.168.1.1
To clear the DHCP snooping binding entries for specific interfaces, use the clear ip
dhcp snooping binding interface Privileged EXEC mode command.
Syntax
clear ip dhcp snooping binding interface
IPv4-Addr
}
interface-id
16
246