Table of Contents
Advertisement
Address Table Commands
mac address-table aging-time
mac address-table aging-time
mac address-table static
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To set the aging time of the MAC address table, use the mac address-table aging-
time Global Configuration mode command.
Syntax
mac address-table aging-time
Parameters
•
seconds
—The time in seconds that an entry remains in the MAC address
table. (Range:10 to 1000000 seconds, 0 indicates no aging)
Default Configuration
The default aging time is 300 seconds.
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# mac address-table aging-time 600
To add a MAC-layer station source address to the MAC address table, use the mac
address-table static Global Configuration mode command.
To delete a MAC address from the MAC address table, use the no form of this
command.
Syntax
mac address-table static
on-reboot | delete-on-timeout | permanent | secure]
mac address-table static
no mac address-table static
seconds
mac-address
vlan-id
vlan
mac-address
vlan-id
vlan
mac-address
vlan
interface-id
interfaces
drop
vlan-id
5
[delete-
90
Advertisement
Table of Contents
