QoS Commands
show qos queueing
show qos queueing
show rate-limit vlan
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To show the QoS queuing information, use the show qos queueing Privileged
EXEC mode command.
Syntax
show qos queueing
Parameters
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show qos queueing
qid-weights
Ef - Priority
1 - N/A
ena- 1
2 - N/A
ena- 2
3 - N/A
ena- 3
4 - N/A
ena- 4
5 - N/A
ena- 5
6 - N/A
ena- 6
7 - N/A
ena- 7
8 - N/A
ena- 8
To show the port rate limit for a specific VLAN or for all VLANs, use the show rate-
limit vlan Prvileged EXEC mode command.
Syntax
vlan-id
show rate-limit vlan
Parameters
vlan-id
•
—The VLAN ID.
28
408