Table of Contents
Advertisement
AAA Commands
aaa authentication enable
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
This chapter describes the Authentication, Authorization, and Accounting (AAA)
commands.
To set one or more authentication methods for accessing higher privilege levels,
use the aaa authentication enable Global Configuration mode command.
To restore the default authentication method, use the no form of this command.
Syntax
aaa authentication enable {default |
no aaa authentication enable {default |
Parameters
•
default—Uses the default authentication method list when accessing higher
privilege levels.
LISTNAME
•
—Name of the authentication method list activated when users
access higher privilege levels. (Length: 1 to 32 characters)
•
method1
[
method2
tries, in the given sequence.
Default Configuration
The enable password command defines the default authentication login method.
This command functions the same as the aaa authentication enable default enable
command.
On a console, the enable password is used if a password exists. If no password is
set, the authentication still succeeds. This command functions the same as
entering the aaa authentication enable default enable none command.
LISTNAME
}
LISTNAME
...]—A list of methods that the authentication algorithm
method1
method2
[
...]
}
3
50
Advertisement
Table of Contents
