VLAN Commands
show vlan default-vlan
show vlan default-vlan
switchport access vlan
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To show the default VLAN, use the show vlan default-vlan Privileged EXEC
command.
Syntax
show vlan default-vlan
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show vlan default-vlan
Default VLAN-ID : 1
An access interface can belong to only one VLAN. To reassign an interface to a
different VLAN, use the switchport access vlan Interface Configuration mode
command.
To revert to its default setting, use the no form of this command.
Syntax
switchport access vlan
no switchport access vlan
Parameters
vlan-id
•
—The VLAN ID to which the port is configured.
vlan-id
41
507