Ipv6 Mld Snooping Vlan Forward-All - Cisco 220 Series Smart Plus Reference Manual

IPv6 MLD Snooping Commands

ipv6 mld snooping vlan forward-all

ipv6 mld snooping vlan forward-all
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
switchxxxxxx(config)# ipv6 mld snooping vlan 1 mrouter interfaces po3
To enable the MLD snooping forward-all static port processing on a VLAN, use the
ipv6 mld snooping vlan forward-all Global Configuration mode command.
To disable this feature on the VLAN, use the no form of this command.
Syntax
ipv6 mld snooping vlan
no ipv6 mld snooping vlan
Parameters
VLAN-LIST
• —A VLAN ID or a list of VLAN IDs.
interface-id—
• interfaces
The interfaces can be one of these types: Ethernet port or port channel.
Default Configuration
No port is configured as a member of a multicast group.
Command Mode
Global Configuration mode
User Guidelines
You can execute the command before the VLAN is created.
You can register an entry without specifying an interface.
Using the no command without a port list removes the entry.
Example
switchxxxxxx(config)# ipv6 mld snooping vlan 1 forward-all interfaces fa1
switchxxxxxx(config)# ipv6 mld snooping vlan 1 forward-all interfaces gi1
switchxxxxxx(config)# ipv6 mld snooping vlan 1 forward-all interfaces po1
VLAN-LIST
forward-all interfaces
VLAN-LIST
forward-all interfaces
Specifies an interface ID or a list of interface IDs.
19
interface-id
interface-id
293