Cisco 220 Series Smart Plus Reference Manual page 121

CDP Commands
show cdp traffic global
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Parameters
N/A
Command Mode
Privileged EXEC Mode
Example
switchxxxxxx# show cdp traffic global
CDP counters :
Total packets output: 101, Input: 0
Hdr syntax: 0, Chksum error: 0, Invalid packet: 0
No memory in main cache: 0
CDP version 1 advertisements output: 0, Input: 0
CDP version 2 advertisements output: 101, Input: 0
The following table describes the significant fields shown in the example:
Field
Total packets output,
input
Hdr syntax
Chksum error
Invalid packet
CDP version 1
advertisements
output, input
CDP version 2
advertisements
output, input
Description
Total number of CDP packets received and transmitted
on all interfaces.
Number of times that packet information could not be
stored in cache because of lack of room.
Number of packets received with illegal checksum
value.
Number of packets received with errors other than
illegal checksums.
Number of CDP version 1 packets received and
transmitted on all interfaces.
Number of CDP version 2 packets received and
transmitted on all interfaces.
7
119