Gvrp Enable (Global); Gvrp Enable (Interface) - Cisco 220 Series Smart Plus Reference Manual

GVRP Commands

gvrp enable (Global)

gvrp enable (Global)

gvrp enable (Interface)

Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To enable GVRP globally on the switch, use the gvrp enable Global Configuration
mode command.
To disable GVRP on the switch, use the no form of this command.
Syntax
gvrp enable
no gvrp enable
Parameters
N/A
Default Configuration
GVRP is globally disabled.
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# gvrp enable
To enable GVRP on an interface, use the gvrp enable Interface Configuration mode
command.
To disable GVRP on an interface, use the no form of this command.
Syntax
gvrp enable
no gvrp enable
Default Configuration
GVRP is disabled on all interfaces.
12
179