STP Commands
clear spanning-tree detected-protocols
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To restart the Spanning Tree Protocol (STP) migration process (force renegotiation
with neighboring switches) on all interfaces or on a specific interface, use the clear
spanning-tree detected-protocols Interface Configuration mode command.
Syntax
clear spanning-tree detected-protocols [interfaces
Parameters
interface-id
•
interfaces
Default Configuration
N/A
Command Mode
Interface Configuration (Ethernet, port channel) mode
User Guidelines
This feature can only be used when the switch is in RSTP or MSTP mode.
Example
switchxxxxxx# clear spanning-tree detected-protocols
—An interface ID or a list of interface IDs.
33
interface-id
]
416