Lldp Med Network-Policy Voice Auto - Cisco 220 Series Smart Plus Reference Manual

LLDP Commands

lldp med network-policy voice auto

lldp med network-policy voice auto
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Default Configuration
The location is not configured.
Command Mode
Interface Configuration (Ethernet) mode
Example
switchxxxxxx(config)# interface gi2
switchxxxxxx(config-if)# lldp med location civic-address 616263646566
To automatically create an LLDP MED network policy for voice application, if the
voice VLAN operation mode is auto voice VLAN, use the lldp med network-policy
auto Global Configuration mode command. The voice VLAN, 802.1p priority, and
the DSCP value of the voice VLAN are used in the policy.
To disable this feature, use the no form of this command.
Syntax
lldp med network-policy voice auto
no lldp med network-policy voice auto
Parameters
N/A
Default Configuration
Enabled
Command Mode
Global Configuration mode
22
322