Ipv6 Mld Snooping Vlan Forbidden Mrouter - Cisco 220 Series Smart Plus Reference Manual

IPv6 MLD Snooping Commands

ipv6 mld snooping vlan forbidden mrouter

ipv6 mld snooping vlan forbidden mrouter
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Command Mode
Global Configuration mode
User Guidelines
You should configure the immediate leave feature only when there is a maximum of
one receiver on each interface in the VLAN.
Example
switchxxxxxx(config)# ipv6 mld snooping vlan 3 fastleave
To forbid a port from being defined as a multicast router port by static
configuration or by automatic learning, use the ipv6 mld snooping vlan forbidden
mrouter Global Configuration mode command.
To revert to its default settings, use the no form of this command.
Syntax
ipv6 mld snooping vlan
no ipv6 mld snooping vlan
Parameters
VLAN-LIST
• —A VLAN ID or a range of VLAN IDs.
interface-id—
• interfaces
interfaces can be one of these types: Ethernet port or port channel.
Default Configuration
No ports are defined.
Command Mode
Global Configuration mode
VLAN-LIST
forbidden mrouter interfaces
VLAN-LIST
forbidden mrouter interfaces
Specifies an interface or a list of interface IDs. The
19
interface-id
interface-id
283