Table of Contents
Advertisement
IGMP Snooping Commands
ip igmp snooping vlan static
ip igmp snooping vlan static
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Syntax
ip igmp snooping vlan
no ip igmp snooping vlan
Parameters
VLAN-LIST
•
—A VLAN ID or a list of VLAN IDs. (Range: 1 to 4094)
count
•
—The number of expected packet loss on a link. (Range:1 to 7)
Default Configuration
N/A
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# interface vlan 1 robustness-variable 5
To enable the IGMP Snooping static group processing on a VLAN, use the ip igmp
snooping vlan static Global Configuration mode command.
To disable this feature, use the no form of this command.
Syntax
ip igmp snooping vlan
no ip igmp snooping vlan
Parameter
VLAN-LIST
•
—A VLAN ID or a list of VLAN IDs. (Range: 1 to 4094)
•
IPv4-Addr
—IPv4 multicast address.
interface-id—
•
interface
types: Ethernet port or port channel.
VLAN-LIST
robustness-variable
VLAN-LIST
robustness-variable
VLAN-LIST
IPv4-Addr
static
VLAN-LIST
static
The interface ID. The interfaces can be one of these
count
interface-id
interface
IPv4-Addr
interface
interface-id
13
213
Advertisement
Table of Contents
