Table of Contents
Advertisement
QoS Commands
show qos
show qos
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To show the QoS settings on the switch, use the show qos Privileged EXEC mode
command.
Syntax
show qos
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Examples
Example 1—The following example displays QoS attributes when the switch is in
QoS basic mode:
switchxxxxxx# show qos
Basic trust: dscp
Qos: basic
Example 2—The following example displays QoS attributes when the switch is in
QoS advanced mode:
switchxxxxxx# show qos
QoS Mode: advanced
Advanced mode trust type: cos
Advanced mode ports state: Not trusted
28
404
Advertisement
Table of Contents
