Dot1X Guest-Vlan Enable (Interface) - Cisco 220 Series Smart Plus Reference Manual

802.1X Commands

dot1x guest-vlan enable (Interface)

dot1x guest-vlan enable (Interface)
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
switchxxxxxx(config)# dot1x guest-vlan 2 enable
To enable unauthorized users on the interface accessing the guest VLAN, use the
dot1x guest-vlan enable Interface Configuration (Ethernet) mode command.
To disable unauthorized users on the interface accessing the guest VLAN, use the
no form of this command.
Syntax
dot1x guest-vlan enable
no dot1x guest-vlan enable
Parameters
N/A
Default Configuration
Unauthorized users cannot access the guest VLAN by default.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
The switch can have only one guest VLAN. The guest VLAN is defined in the dot1x
guest-vlan enable Global Configuration mode command.
Example
The following example enables unauthorized users on gi 1 5 to access the guest
VLAN:
switchxxxxxx(config)# interface gi15
switchxxxxxx(config-if)# dot1x guest-vlan enable
2
37