Table of Contents
Advertisement
System Management Commands
traceroute
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# traceroute 192.168.1.55
traceroute to 192.168.1.55 (192.168.1.55), 30 hops max, 40 byte packets
1
192.168.1.254 (192.168.1.254)
The following table describes the significant fields shown in the example:
Field
1
192.168.1.55
3010 ms 3010 ms
3010 ms
The following are characters that can appear in the traceroute command output:
Field
*
?
A
F
H
N
P
Q
R
S
U
3010 ms !H
Description
Sequence number of the router in the path to the host.
IP address of the destination host.
Round-trip time for the probes that are sent.
Description
The probe timed out.
Unknown packet type.
Administratively unreachable. Usually, this is output.
Fragmentation required and DF is set.
Host unreachable.
Network unreachable.
Protocol unreachable.
Source quench.
Fragment reassembly time exceeded.
Source route failed.
U Port unreachable.
3010 ms !H
3010 ms !H
36
466
Advertisement
Table of Contents
