Voice VLAN Commands
voice vlan id
voice vlan id
voice vlan vpt
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To set a VLAN as the voice VLAN, use the voice vlan id Global Configuration mode
command.
To revert to its default setting, use the no form of this command.
Syntax
VLAN-id
voice vlan id
no voice vlan id
Parameters
VLAN-id
•
—Identifier of the VLAN as the voice VLAN. (Range: 1 to 4094)
Default Configuration
The default voice VLAN is VLAN 1.
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# vlan 104
switchxxxxxx(config-vlan)# exit
switchxxxxxx(config)# voice vlan id 104
To define the voice VLAN priority tag (VPT) that will be advertised by LLDP in the
network policy TLV, use the voice vlan vpt Global Configuration mode command.
To revert to its default setting, use the no form of this command.
Syntax
vpt-value
voice vlan vpt
no voice vlan vpt
40
499