TACACS+ Commands
show tacacs default-config
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To show the default Terminal Access Controller Access-Control System Plus
(TACACS+) parameters, use the show tacacs default-config Privileged EXEC
mode command.
Syntax
show tacacs default-config
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show tacacs default-config
Timeout|
Key
--------+---------
20
| accounting12345
The following table describes the significant fields shown in the example:
Field
Timeout
Description
Default number of seconds that passes before the
connection between the switch and the TACACS+
server times out.
37
461