Ip Igmp Filter - Cisco 220 Series Smart Plus Reference Manual

IGMP Snooping Commands

ip igmp filter

ip igmp filter
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Parameters
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# clear ip igmp snooping statistics
To control whether or not all hosts on a Layer 2 interface can join one or more IP
multicast groups by applying an IGMP profile to the interface, use the ip igmp filter
Interface Configuration mode command.
To remove an IGMP profile from the interface, use the no form of this command.
Syntax
profile-number
ip igmp filter
no ip igmp filter
Parameter
profile-number
•
Default Configuration
No IGMP profiles are applied.
Command Mode
Interface Configuration mode
User Guidelines
An IGMP profile can be applied to one or more interfaces, but one interface can
have only one profile applied to it.
Example
—The IGMP profile number to be applied. (Range: 1 to 128)
13
197