Table of Contents
Advertisement
IGMP Snooping Commands
ip igmp snooping vlan querier
ip igmp snooping vlan querier
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Default Configuration
Learning pim-dvmrp is enabled by default.
Command Mode
Global Configuration mode
User Guidelines
Multicast router ports are learned according to:
•
Queries received on the port
•
PIM/PIMv2 received on the port
•
DVMRP received on the port
•
MOSPF received on the port
You can execute the command before the VLAN is created.
Example
switchxxxxxx(config)# ip igmp snooping vlan 1 mrouter learn pim-dvmrp
To enable the IGMP querier on specific VLANs, use the ip igmp snooping vlan
querier Global Configuration mode command.
To disable the IGMP querier on specific VLANs, use the no form of this command.
Syntax
ip igmp snooping vlan
no ip igmp snooping vlan
Parameters
•
VLAN-LIST
—A VLAN ID or a list of VLAN IDs. (Range: 1 to 4094)
Default Configuration
Disabled
VLAN-LIST
querier
VLAN-LIST
querier
13
209
Advertisement
Table of Contents
