Lldp Timer - Cisco 220 Series Smart Plus Reference Manual

LLDP Commands

lldp timer

lldp timer
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Default Configuration
The default delay time is 2 seconds.
Command Mode
Global Configuration mode
User Guidelines
We recommend that the tx-delay is less than 0.25 of the LLDP timer interval.
Example
switchxxxxxx(config)# lldp tx-delay 10
To specify how often the system sends the LLDP updates, use the lldp timer
Global Configuration mode command.
To revert to its default setting, use the no form of this command.
Syntax
seconds
lldp timer
no lldp timer
Parameters
seconds
• —The minimum time in seconds that an LLDP port transmits the
advertisement periodically. (Range: 5 to 32767)
Default Configuration
30 seconds
Command Mode
Global Configuration mode
User Guidelines
LLDP transmission interval multiplies the holdtime multiplier should be smaller
than 65535.
22
332