Table of Contents
Advertisement
IPv6 MLD Snooping Commands
show ipv6 mld snooping vlan
show ipv6 mld snooping vlan
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Static Mrouter Table
VID
| Port Mask
------+------------------------
Total Entry 0
Forbidden Mrouter Table
VID
| Port Mask
------+------------------------
Total Entry 0
To display the MLD snooping configuration on specific VLANs, use the show ipv6
mld snooping vlan Privileged EXEC mode command.
Syntax
show ipv6 mld snooping vlan [
Parameters
VLAN-LIST
•
—(Optional) A VLAN ID or a list of VLAN IDs.
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show ipv6 mld snooping vlan 100
MLD Snooping is globaly enabled
MLD Snooping VLAN 1 admin : disabled
MLD Snooping oper mode : disabled
MLD Snooping robustness: admin 2 oper 2
MLD Snooping query interval: admin 125 sec oper 125 sec
MLD Snooping query max response : admin 10 sec oper 10 sec
MLD Snooping last member query counter: admin 2
MLD Snooping last member query interval: admin 1000 sec
MLD Snooping last immediate leave: disabled
MLD Snooping automaic learing of mrouter ports: enabled
VLAN-LIST
]
19
oper 2
oper 1000 sec
302
Advertisement
Table of Contents
