IP Source Guard Commands
show ip source binding
show ip source binding
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To show information for all IP source binding rules defined on the switch, use the
show ip source binding Privileged EXEC mode command.
Syntax
show ip source binding [dynamic | static]
Parameters
•
dynamic
—
(Optional) Displays information for IP source bindings that were
learned by DHCP snooping.
—
•
static
(Optional) Displays information for static IP source bindings.
Command Mode
Privileged EXEC mode
User Guidelines
The show ip source binding command output shows all dynamic and static IP
source binding entries in the binding database.
Example
switchxxxxxx# show ip source binding
Bind Table: Maximun Binding Entry Number 191
Port
| VID
|
--------+------+-------------------+-----------------+-------------+--------
fa11 |
2 | 00:03:6D:01:10:A0 |
Static
| NA
Total Entry: 1
The following table describes the significant fields shown in the example:
Field
Port
VID
MAC Address
|
Description
Interface number.
Identifier of the VLAN with which the address is
associated.
IP
|
Type
192.168.1.77(255.255.255.255)|
17
| Lease Time
267