Table of Contents
Advertisement
IPv6 MLD Snooping Commands
ipv6 mld snooping report-suppression
ipv6 mld snooping report-suppression
ipv6 mld snooping vlan
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To enable IPv6 MLD snooping report suppression on the switch, use the ipv6 mld
snooping report-suppression Global Configuration mode command.
To disable this feature, use the no form of this command.
Syntax
ipv6 mld snooping report-suppression
no ipv6 mld snooping report-suppression
Parameters
N/A
Default Configuration
IPv6 MLD snooping report suppression is disabled by default.
Command Mode
Global Configuration mode
User Guidelines
MLD snooping listener message suppression is equivalent to IGMP Snooping
report suppression. When enabling MLD snooping report suppression, received
MLDv1 reports to a group are forwarded to IPv6 multicast routers only once in
every report-forward time. This funciton prevents the forwarding of duplicate
reports.
Example
switchxxxxxx(config)# ipv6 mld snooping report-suppression
To configure the IPv6 MLD snooping parameters on the VLANs, use the ipv6 mld
snooping vlan Global Configuration mode command.
To revert to its default setting, use the no form of this command.
19
281
Advertisement
Table of Contents
