Ip Domain Lookup - Cisco 220 Series Smart Plus Reference Manual

IP Addressing Commands

ip domain lookup

ip domain lookup
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Parameters
IPv4-ADDR
• —IPv4 address of the default gateway.
Default Configuration
No default gateway is defined.
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# ip default-gateway 192.168.1.100
To enable the IP Domain Naming System (DNS)-based host-name-to-address
translation, use the ip domain lookup Global Configuration mode command.
To revert to its default setting, use the no form of this command.
Syntax
ip domain lookup
no ip domain lookup
Parameters
N/A
Default Configuration
Enabled
Command Mode
Global Configuration mode
User Guidelines
This command enables the switch to query domain name for DNS server.
14
227